HUMIDITY CONTROL FOR SENSITIVE BUILDINGS
To be able to keep a low temperature without risking humidity-related damage and expensive restorations.
Dehumidification that is easy to install without extensive rebuild or pipes.
Heat condensation makes it possible to lower the temperature to save on heating in buildings that are not used continuously without risking humidity-related damage and expensive restorations.
A dry and cold building is an efficient building. Plus, churches are often built to be kept cold. When it is time for mass, just start heating a day or two in advance!
Connect power and water drainage. Place the dehumidifier where you want it and set desired humidity level. Then kick off. It does not have to be complicated.
Dehumidification with condensation means there is no need for damage on the walls och surfaces. The water in removed through a hose to the nearest sewer. The unit can be operated independently according to configured parameters for humidity level or dew point or it can be connected to control system via Wifi or Modbus connection.
Depending on the size of the building one or more FLEX demudifiers can be used. Or a REX for larger buildings. A standard church built in stone that is used from time to time and kept at 5 degrees needs typciall 2 FLEX units.
We can advice on the selection and do a humidity investigation prior to installation.