Scroll to top

FLEX

Downloads

Read more data about the FLEX and cases







Bild på produkten FLEX svart färg

FLEX Accessories

Please fill the form and click on Download button to get access to product documentation

A range of accessories designed for the FLEX:

  • Container wagon, a container on wheels that collect water when no drain is available. The FLEX is positioned on top and can with the wagon also be easily repositioned if needed.
  • Mounting kit, a bracket designed for the FLEX when mounted on a wall or similar
  • Garanluate, a kit with silica gel to replace to keep optimal performance

FLEX dehumidification capacity per temperature

This graph shows that the FLEX capacity is independent of humidity (20% – 100%) and is stay high down to subzero temperatures.

Works equally well in ALL temperatures

4 models: Basic, Smart, Cloud, Integrate

FLEX is an intelligent condensing dehumifier that is based on the cutting-edge patented Heat Condensation technology.

FLEX is developed to condense moisture in all kinds of environments and works equally energy efficient in all temperatures, even sub zero degrees.

FLEX enables lowering of temperature without risking increasing humidity levels. This way you will be able to reduce general heating and save costs, energy and the environment.

The installation is easy. All you need is a standard electricity connection and drainage for the produced water.

FLEX is typically configured to reach a predefined level of relative humidity but can optionally be set for a certain Dew Point value or Mold Curve. These options optimize the energy usage by enabling FLEX to focus on the critical parameters in the installation. The dew point to avoid corrosion on cold pipes for example.

Now available is Temp Guard is a function for the FLEX series Smart, Cloud and Integrate. Temp Guard is used to keep the space frost-free with FLEX’s built-in element as a heat source. With the Temp Guard function enabled, the dehumidifier alone creates an optimal climate at the lowest cost.

Thanks to your dehumidifiers we can now start restore those chambers that previously were no point in restoring since the same problem occurred year after year
Mats Lindhom

- Mats Lindhom

Kraftringen

Technical specification

4 models: Basic, Smart, Cloud, Integrate

Basic

All models are available in Black or White colour.

The specification for the Basic model is:

  • Temperature working range: -20°C to +50°C
  • Humidity (Rh) working range: 10 % to 100%
  • Power connection: 230V 1-50Hz 10A
  • Average power consumption: 400W
  • Peak power consumption: 2 kW
  • Enclosure: IP64
  • Airflow: 400 m3/h
  • Dimensions: 340 x 650 x 1060 mm
  • Weight: 20kg
  • Noise: 65 dB
  • Filter standard: G4

Smart

All models are available in Black or White colour.

The specification for the Smart model is:

  • Temperature working range: -20°C to +50°C
  • Humidity (Rh) working range: 10 % to 100%
  • Power connection: 230V 1-50Hz 10A
  • Average power consumption: 400W
  • Peak power consumption: 2 kW
  • Enclosure: IP64
  • Airflow: 400 m3/h
  • Dimensions: 340 x 650 x 1060 mm
  • Weight: 20kg
  • Noise: 65 dB
  • Filter standard: G4

The Smart model has the added functionality:

  • Adjustable Air Flow
  • Mold curve control

Cloud

All models are available in Black or White colour.

The specification for the Cloud model is:

  • Temperature working range: -20°C to +50°C
  • Humidity (Rh) working range: 10 % to 100%
  • Power connection: 230V 1-50Hz 10A
  • Average power consumption: 400W
  • Peak power consumption: 2 kW
  • Enclosure: IP64
  • Airflow: 400 m3/h
  • Dimensions: 340 x 650 x 1060 mm
  • Weight: 20kg
  • Noise: 65 dB
  • Filter standard: G4

The Cloud model has the added functionality:

  • Adjustable Air Flow
  • Mold curve control
  • WIFI

Integrate

All models are available in Black or White colour.

The specification for the Integrate model is:

  • Temperature working range: -20°C to +50°C
  • Humidity (Rh) working range: 10 % to 100%
  • Power connection: 230V 1-50Hz 10A
  • Average power consumption: 400W
  • Peak power consumption: 2 kW
  • Enclosure: IP64
  • Airflow: 400 m3/h
  • Dimensions: 340 x 650 x 1060 mm
  • Weight: 20kg
  • Noise: 65 dB
  • Filter standard: G4

The Integrate model has the added functionality:

  • Adjustable Air Flow
  • Mold curve control
  • WIFI
  • Modbus interface (configurable protocol)

WHAT’S IN THE BOX?

Your FLEX is delivered with a 3 m hose for a quick and easy installation together with a manual.

FLEX comes with up to 3 years warranty if the FLEX Service agreement is added and if running maintenance according to the manual is performed.

inherit1