FLEX Dehumidifier
Performs equally well at all temperatures.
An intelligent portable dehumidifier
FLEX is an intelligent portable dehumidifier based on Airwatergreen's patented technology. It utilizes an adsorption method that provides a range of unique benefits:
- Halved energy consumption compared to traditional technology
- Equal efficiency at all temperatures – even below freezing
- Equal efficiency at all humidity levels from 10% – 100% RH
- Simple plug-and-play installation – without the need for unnecessary ventilation ducts
Reduced heating costs
FLEX enables a reduction in heating costs without risking increased humidity levels, as it operates just as effectively at low temperatures. This makes it possible to lower energy consumption in spaces that are rarely used or do not need to be kept heated.
Installation is simple. All you need is a standard electrical connection (220V) and a method for handling the produced water. No ventilation ducts are required, which simplifies installation. FLEX is used in smaller spaces such as crawl spaces, attics, and smaller rooms up to a volume of 600m³ (such as small chapels).
During moisture damage restoration, FLEX is ideal due to its portability. Equipped with remote connectivity, you can easily monitor the reduction in humidity levels (see image on the right) directly from your computer or mobile device.
Dew point sensor for dew point-based control
The FLEX dehumidifier can be set to operate toward a predefined relative humidity (RH) level, but can also be controlled by an external dew point sensor connected to FLEX, or by following the Mold Index (LIM) to prevent mold growth.
These options optimize energy usage by allowing the dehumidifier to focus on the critical parameters of the installation.
Once the target relative humidity level is reached, the dehumidifier pauses while continuously monitoring humidity and temperature levels.
Dew point control uses an external sensor attached to the cold surface to prevent condensation that can lead to corrosion on, for example, cold surfaces or pipes.
Temp Guard function
The Temp Guard feature is available for the FLEX series Smart, Cloud, and Integrate. Temp Guard is used to ensure the space remains frost-free by functioning as a heater if a specific predefined temperature is reached. With the Temp Guard feature activated, the dehumidifier independently creates an optimal climate at the lowest cost.
Technical data for the FLEX dehumidifier
4 models: Basic, Smart, Cloud, Integrate
Basic
All models are available in black or white.
The specification for the Basic model is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure class: IP63
- Airflow: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20 kg
- Noise level: 65 dB
- Standard filter: G4
Smart
All models are available in black or white.
The specification for the Smart model is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 20% to 100%
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure class: IP63
- Airflow: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20 kg
- Noise level: 65 dB
- Standard filter: G4
- Temp Guard: Yes – optional addition
The SMART model features additional functionality:
- Adjustable airflow
- Can be controlled via an external sensor for dew point regulation
- Control based on Mold Index curve
Cloud
All models are available in black or white.
The specification for the Cloud model is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure class: IP63
- Airflow: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20 kg
- Noise level: 65 dB
- Standard filter: G4
- Temp Guard: Yes – optional addition
The CLOUD model features additional functionality:
- Adjustable airflow
- Can be controlled via an external sensor for dew point regulation
- Control based on Mold Index curve
- Wi-Fi
Integrate
All models are available in black or white.
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10% to 100%
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure class: IP63
- Airflow: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20 kg
- Noise level: 65 dB
- Standard filter: G4
- Temp Guard: Yes – optional addition
The Integrate model features additional functionality:
- Adjustable airflow
- Can be controlled via an external sensor for dew point regulation
- Control based on Mold Index curve
- Wi-Fi
- Modbus interface (configurable protocol)
FLEX dehumidifier accessories
A range of accessories is available, specifically designed for the FLEX:
- Container trolley, a wheeled container that collects water when no drainage is available. The FLEX dehumidifier is mounted on top and can also be easily relocated using the trolley when needed. 40-liter capacity.
- Wall bracket, a bracket designed for mounting FLEX on a wall or similar structure
- Filter kit, a kit containing silica gel granules to replace the existing silica gel after a certain period of operation (see manual) to maintain optimal performance. The kit also includes an air filter.
- Air filter, filters the air as it passes through the dehumidifier
FLEX dehumidification capacity per temperature
This graph demonstrates that the dehumidifier's capacity is independent of relative humidity (20% – 100% RH), remaining consistently high down to 10°C, and maintaining effective performance below -10°C.
Mount your FLEX on the wall
Condensation on cold surfaces
How our condensation dehumidifier can assist with our dew point control function.
Contact us – get in touch!
Would you like to discuss your specific facility? We are happy to assist in estimating the moisture load and sizing the correct solution. Get in touch and we will schedule a brief call or site visit.