FLEX dehumidifier
Works equally well in all temperatures.
An intelligent portable dehumidifier
FLEX is an intelligent portable dehumidifier based on Airwatergreen's patented technology. It is an adsorption method that provides a range of unique benefits:
- Energy consumption halved compared to traditional technology
- Same efficiency at all temperatures - even at freezing
- Same efficiency at all moisture levels from 10% - 100% RH
- Easy plug-n-play installation - no need to run unnecessary ventilation pipes
A reduction in heating costs
FLEX enables a reduction in heating costs without risking increasing humidity levels because it works just as efficiently at low temperatures. In this way, energy consumption can be reduced in premises that are rarely used or do not need to be kept heated.
Installation is simple. All you need is a standard electrical connection (220V) and a way to take care of the produced water. No ventilation pipes are necessary which simplifies installation. FLEX is used in smaller spaces such as crawl spaces, attics, smaller premises up to 600m3 volume (smaller church).
FLEX is used for remediation of moisture damage as it is easy to carry on site. Equipped with a connection, you can easily follow how the moisture level goes down (see the picture to the right) from your computer or mobile.
Dew point sensor for control relative to the dew point
FLEX dehumidifiers can be set to work against a predefined level of relative humidity (RH) but can also be controlled by an external dew point sensor connected to the FLEX, or follow the index to avoid mold formation (LIM).
These options optimize energy use by allowing the dehumidifier to focus on the critical parameters of the installation.
When the relative humidity level is reached, the dehumidifier pauses, but continuously senses humidity and temperature levels.
The dew point control uses an external sensor that is attached to the cold surface to avoid condensation that can lead to corrosion on e.g. cold surfaces/pipes.
Temp Guard functions
The Temp Guard function is available for the FLEX Smart, Cloud and Integrate series. Temp Guard is used to keep the space frost-free by acting as an element if a certain predefined temperature is passed. With the Temp Guard function activated, the dehumidifier alone creates an optimal climate at the lowest cost.
Contact us - get in touch!
Want to discuss your specific installation? We are happy to help estimate the moisture load and dimension the right solution. Get in touch and we will book a short call or site visit.
Technical data on FLEX dehumidifiers
4 models: Basic, Smart, Cloud, Integrate
Basic
All models are available in black or white color.
The specification of Basic is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10 % to 100 %
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
Smart
All models are available in black or white color.
The specification of Smart is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 20 % to 100 %
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes - can be supplemented
The SMART model has extra functionality:
- Adjustable air flow
- Can be controlled via external sensor for dew point control
- Check against the Mold Index Curve
Cloud
All models are available in black or white color.
The specification for Cloud is:
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10 % to 100 %
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes - can be supplemented
The CLOUD model has extra functionality:
- Adjustable air flow
- Can be controlled via external sensor for dew point control
- Check against the Mold Index Curve
- WIFI
Integrate
All models are available in black or white color.
- Temperature range: -20°C to +50°C
- Relative humidity (RH): 10 % to 100 %
- Electrical connection: 230V 1-50Hz 10A
- Medelförbrukning: <400W
- Enclosure: IP63
- Air flow rate: 400 m3/h
- Fuse: 10A
- Dimensions: 340 x 650 x 1060 mm
- Weight: 20kg
- Noise: 65 dB
- Standard filter: G4
- Temp Guard: Yes - can be supplemented
The Integrate model has extra functionality:
- Adjustable air flow
- Can be controlled via external sensor for dew point control
- Check against the Mold Index Curve
- WIFI
- Modbus interface (configurable protocol)
Unpack your FLEX dehumidifier
Your FLEX comes with a pack of granules, a 3 m hose with hose clamp, a manual and a Quick install manual in Swedish for a quick and easy installation.
FLEX dehumidifier accessories
There is a range of accessories designed for FLEX:
- The container trolley, a container on wheels that collects water when no drain is available. The FLEX dehumidifier is placed on top and with the help of the trolley can also be easily moved if necessary. 40 liter capacity.
- Wall bracket, a bracket designed for mounting FLEX on a wall or similar
- Filter kit, a kit containing granules with silica gel to replace the existing silica gel with after a certain time (see manual) to keep optimal performance. The kit also includes an air filter.
- Air filter, filters the air when passing through the dehumidifier
FLEX dehumidification capacity per temperature
This graph shows that the capacity of the dehumidifier is independent of the humidity (20% - 100% RH) and is equally high down to 10°C, and remains good down to below -10°C.
Mount your flex on the wall
Condensation on cold surfaces
How our condensation dehumidifier can help with our Dew Point Control feature.