Background information
When producing ice cream, it is necessary to maintain a low temperature at all stages to ensure good quality. This means that the premises usually maintain a lower temperature of between 4°C - 12°C even outside the actual production. As a result, there is a high risk of condensation, with the risk of mold formation, but also of packaging absorbing inappropriate amounts of moisture. Therefore, it is important that the water level in the air is kept under control! And in an energy-efficient way!
Moisture challenges are best handled with Airwatergreen dehumidifiers as they have uniquely low electricity consumption, are easy to install and have high capacity even at low temperatures!
What problems did the Airwatergreen dehumidifier solve?
Two REX dehumidifiers are used in the SIA Glass warehouse to avoid condensation but also reduce ice formation in the freezer room. Water reduced from the air is led down the nearest floor drain. With a reduced risk of condensation, a safer working climate is created with a reduced risk of slipping accidents and the risk of moisture damage to packaging and other equipment is reduced. In addition, the cooling units are relieved as it is easier to cool dry air than moist!
A REX is installed in the palletizing room. The aim is to avoid corrosion, mold and moisture damage to the packaging.
Benefits of using awg products vs. doing nothing?
With the use of REX, an appropriate level of moisture can be maintained in the premises. This avoids damage to packaging, corrosion on equipment and avoids mold formation. A better climate in the premises provides a healthier environment and reduces the risk of slipping accidents. Challenges with icing on the cooling units save energy and also reduce wear on the cooling units. REX is easy to install and can also be easily relocated when needs change. REX has a uniquely low electricity consumption even at low temperatures.